# Auto-generated file -- DO NOT EDIT

# Check if we want to show what we are doing
ifdef VERBOSE
	Q =
else
	Q = @
endif

include Makefile.am

SOURCE_LIST = !!SOURCE_LIST!!
CONFIG_CACHE_SOURCE_LIST = !!CONFIG_CACHE_SOURCE_LIST!!
CONFIGURE_FILES = !!CONFIGURE_FILES!!
LIPO = !!LIPO!!
BIN_DIR = !!BIN_DIR!!
SRC_DIR = !!SRC_DIR!!
ROOT_DIR = !!ROOT_DIR!!
BUNDLE_DIR = "$(ROOT_DIR)/bundle"
BUNDLES_DIR = "$(ROOT_DIR)/bundles"
INSTALL_DIR = !!INSTALL_DIR!!
INSTALL_BINARY_DIR = "$(INSTALL_DIR)/"!!BINARY_DIR!!
INSTALL_ICON_DIR = "$(INSTALL_DIR)/"!!ICON_DIR!!
INSTALL_DATA_DIR = "$(INSTALL_DIR)/"!!DATA_DIR!!
TTD = !!TTD!!
TTDS = $(SRC_DIRS:%=%/$(TTD))
OS = !!OS!!
OSXAPP = !!OSXAPP!!
REVISION = !!REVISION!!
AWK = !!AWK!!
DISTCC = !!DISTCC!!

RES := $(shell if ! [ -f $(CONFIG_CACHE_SOURCE_LIST) ] || [ -n "`cmp $(CONFIG_CACHE_SOURCE_LIST) $(SOURCE_LIST)`" ]; then cp $(SOURCE_LIST) $(CONFIG_CACHE_SOURCE_LIST); fi )

all: config.cache
ifdef DISTCC
	@if [ -z "`echo '$(MFLAGS)' | grep '\-j'`" ]; then echo; echo "WARNING: you enabled distcc support, but you don't seem to be using the -jN paramter"; echo; fi
endif
	@for dir in $(DIRS); do \
		$(MAKE) -C $$dir all; \
	done
ifdef LIPO
# Lipo is an OSX thing. If it is defined, it means we are building for universal,
# and so we have have to combine the binaries into one big binary

# Remove the last binary made by the last compiled target
	$(Q)rm -f $(BIN_DIR)/$(TTD)
# Make all the binaries into one
	$(Q)$(LIPO) -create -output $(BIN_DIR)/$(TTD) $(TTDS)
endif

help:
	@echo "Available make commands:"
	@echo ""
	@echo "Compilation:"
	@echo "  all           compile the executable and the lang files"
	@echo "  lang          compile the lang files only"
	@echo "Clean up:"
	@echo "  clean         remove the files generated during compilation"
	@echo "  mrproper      remove the files generated during configuration and compilation"
	@echo "Run after compilation:"
	@echo "  run           execute openttd after the compilation"
	@echo "  run-gdb       execute openttd in debug mode after the compilation"
	@echo "  run-prof      execute openttd in profiling mode after the compilation"
	@echo "Installation:"
	@echo "  install       install the compiled files and the data-files after the compilation"
	@echo "  bundle        create the base for an installation bundle"
	@echo "  bundle_zip    create the zip installation bundle"
	@echo "  bundle_gzip   create the gzip installation bundle"
	@echo "  bundle_bzip2  create the bzip2 installation bundle"
	@echo "  bundle_lha    create the lha installation bundle"
	@echo "  bundle_dmg    create the dmg installation bundle"

config.cache: $(CONFIG_CACHE_SOURCE_LIST) $(CONFIGURE_FILES)
ifeq ($(shell if test -f config.cache; then echo 1; fi), 1)
	@echo "----------------"
	@echo "The system detected that source.list or any configure file is altered."
	@echo " Going to reconfigure with last known settings..."
	@echo "----------------"
# Make sure we don't lock config.cache
	@$(shell cat config.cache | sed 's/\\ /\\\\ /g') || exit 1
	@echo "----------------"
	@echo "Reconfig done. Now compiling..."
	@echo "----------------"
else
	@echo "----------------"
	@echo "Have not found a configuration, please run configure first."
	@echo "----------------"
	@exit 1
endif

clean:
	@for dir in $(DIRS); do \
		$(MAKE) -C $$dir clean; \
	done
	$(Q)rm -rf $(BUNDLE_TARGET)

lang:
	@for dir in $(LANG_DIRS); do \
		$(MAKE) -C $$dir all; \
	done

mrproper:
	@for dir in $(DIRS); do \
		$(MAKE) -C $$dir mrproper; \
		rm -f $$dir/Makefile; \
	done
	$(Q)rm -rf objs
	$(Q)rm -f Makefile Makefile.am
	$(Q)rm -f $(CONFIG_CACHE_SOURCE_LIST) config.cache config.log
	$(Q)rm -rf $(BUNDLE_DIR)
	$(Q)rm -rf $(BUNDLES_DIR)

depend:
	@for dir in $(SRC_DIRS); do \
		$(MAKE) -C $$dir depend; \
	done

run: all
	$(Q)cd !!BIN_DIR!! && ./!!TTD!! $(OPENTTD_ARGS)

run-gdb: all
	$(Q)cd !!BIN_DIR!! && gdb --ex run --args ./!!TTD!! $(OPENTTD_ARGS)

run-prof: all
	$(Q)cd !!BIN_DIR!! && ./!!TTD!! $(OPENTTD_ARGS) && gprof !!TTD!! | less

%.o:
	@for dir in $(SRC_DIRS); do \
		$(MAKE) -C $$dir $(@:src/%=%); \
	done

%.lng:
	@for dir in $(LANG_DIRS); do \
		$(MAKE) -C $$dir $@; \
	done

#
# Creation of bundles
#

# The revision is needed for the bundle name and creating an OSX application bundle.
ifdef REVISION
REV := $(REVISION)
else
# Are we a SVN dir?
ifeq ($(shell if test -d $(SRC_DIR)/.svn; then echo 1; fi), 1)
# Find if the local source if modified
REV_MODIFIED := $(shell svnversion $(SRC_DIR) | sed -n 's/.*\(M\).*/\1/p' )
# Find the revision like: rXXXX-branch
REV := $(shell LC_ALL=C svn info $(SRC_DIR) | $(AWK) '/^URL:.*branches/ { split($$2, a, "/"); BRANCH="-"a[5] } /^Last Changed Rev:/ { REV="r"$$4"$(REV_MODIFIED)" } END { print REV BRANCH }')
endif
endif
# Make sure we have something in REV
ifeq ($(REV),)
REV := norev000
endif

ifndef BUNDLE_NAME
BUNDLE_NAME = OTTD-$(OS)-custom-$(REV)
endif

# An OSX application bundle needs the data files, lang files and openttd executable in a different location.
ifdef OSXAPP
DATA_DIR = $(BUNDLE_DIR)/$(OSXAPP)/Contents/Resources/data
LANG_DIR = $(BUNDLE_DIR)/$(OSXAPP)/Contents/Resources/lang
TTD_DIR  = $(BUNDLE_DIR)/$(OSXAPP)/Contents/MacOS
else
DATA_DIR = $(BUNDLE_DIR)/data
LANG_DIR = $(BUNDLE_DIR)/lang
TTD_DIR  = $(BUNDLE_DIR)
endif

bundle: all
	@echo '[BUNDLE] Constructing bundle'
	$(Q)rm -rf   "${BUNDLE_DIR}"
	$(Q)mkdir -p "${BUNDLE_DIR}"
	$(Q)mkdir -p "$(BUNDLE_DIR)/docs"
	$(Q)mkdir -p "$(BUNDLE_DIR)/scenario"
	$(Q)mkdir -p "$(BUNDLE_DIR)/scenario/heightmap"
	$(Q)mkdir -p "$(BUNDLE_DIR)/media"
	$(Q)mkdir -p "$(TTD_DIR)"
	$(Q)mkdir -p "$(DATA_DIR)"
	$(Q)mkdir -p "$(LANG_DIR)"
ifdef OSXAPP
	$(Q)mkdir -p "$(BUNDLE_DIR)/$(OSXAPP)/Contents/Resources"
	$(Q)echo "APPL????" >                                          "$(BUNDLE_DIR)/$(OSXAPP)/Contents/PkgInfo"
	$(Q)cp    "$(ROOT_DIR)/os/macosx/openttd.icns"                 "$(BUNDLE_DIR)/$(OSXAPP)/Contents/Resources/openttd.icns"
	$(Q)$(ROOT_DIR)/os/macosx/plistgen.sh                          "${BUNDLE_DIR}/$(OSXAPP)" "$(REV)"
	$(Q)cp    "$(ROOT_DIR)/docs/OSX_install_instructions.txt"      "$(BUNDLE_DIR)/docs/"
	$(Q)cp    "$(ROOT_DIR)/os/macosx/splash.png"                   "$(DATA_DIR)"
endif
	$(Q)cp "$(BIN_DIR)/$(TTD)"                "$(TTD_DIR)/"
	$(Q)cp "$(BIN_DIR)/data/"*.grf            "$(DATA_DIR)/"
	$(Q)cp "$(BIN_DIR)/data/opntitle.dat"     "$(DATA_DIR)/"
	$(Q)cp "$(BIN_DIR)/lang/"*.lng            "$(LANG_DIR)/"
	$(Q)cp "$(ROOT_DIR)/readme.txt"           "$(BUNDLE_DIR)/"
	$(Q)cp "$(ROOT_DIR)/COPYING"              "$(BUNDLE_DIR)/"
	$(Q)cp "$(ROOT_DIR)/known-bugs.txt"       "$(BUNDLE_DIR)/docs/"
	$(Q)cp "$(ROOT_DIR)/docs/multiplayer.txt" "$(BUNDLE_DIR)/docs/"
	$(Q)cp "$(ROOT_DIR)/docs/32bpp.txt"       "$(BUNDLE_DIR)/docs/"
	$(Q)cp "$(ROOT_DIR)/changelog.txt"        "$(BUNDLE_DIR)/docs/"
	$(Q)cp "$(ROOT_DIR)/media/openttd.64.png" "$(BUNDLE_DIR)/media/"
	$(Q)cp "$(ROOT_DIR)/media/openttd.32.xpm" "$(BUNDLE_DIR)/media/"
	$(Q)cp "$(ROOT_DIR)/media/openttd.32.bmp" "$(BUNDLE_DIR)/media/"
ifeq ($(shell if test -n "`ls -l \"$(BIN_DIR)/scenario/\"*.scn 2> /dev/null`"; then echo 1; fi), 1)
	$(Q)cp "$(BIN_DIR)/scenario/"*.scn        "$(BUNDLE_DIR)/scenario/"
endif
ifeq ($(shell if test -n "`ls -l \"$(BIN_DIR)/scenario/heightmaps/\"* 2>/dev/null`"; then echo 1; fi), 1)
	$(Q)cp "$(BIN_DIR)/scenario/heightmaps/"* "$(BUNDLE_DIR)/scenario/heightmap/"
endif
ifeq ($(TTD), openttd.exe)
	$(Q)unix2dos "$(BUNDLE_DIR)/docs/"* "$(BUNDLE_DIR)/readme.txt" "$(BUNDLE_DIR)/COPYING"
endif

### Packing the current bundle into several compressed file formats ###
#
# Zips & dmgs do not contain a root folder, i.e. they have files in the root of the zip/dmg.
# gzip, bzip2 and lha archives have a root folder, with the same name as the bundle.
#
# One can supply a custom name by adding BUNDLE_NAME:=<name> to the make command.
#
bundle_zip: bundle
	@echo '[BUNDLE] Creating $(BUNDLE_NAME).zip'
	$(Q)mkdir -p "$(BUNDLES_DIR)"
	$(Q)cd "$(BUNDLE_DIR)" && zip -r $(shell if test -z "$(VERBOSE)"; then echo '-q'; fi) "$(BUNDLES_DIR)/$(BUNDLE_NAME).zip" .

bundle_gzip: bundle
	@echo '[BUNDLE] Creating $(BUNDLE_NAME).tar.gz'
	$(Q)mkdir -p "$(BUNDLES_DIR)/.gzip/$(BUNDLE_NAME)"
	$(Q)cp -R    "$(BUNDLE_DIR)/"* "$(BUNDLES_DIR)/.gzip/$(BUNDLE_NAME)/"
	$(Q)cd "$(BUNDLES_DIR)/.gzip" && tar -zc$(shell if test -n "$(VERBOSE)"; then echo 'v'; fi)f "$(BUNDLES_DIR)/$(BUNDLE_NAME).tar.gz" "$(BUNDLE_NAME)"
	$(Q)rm -rf   "$(BUNDLES_DIR)/.gzip"

bundle_bzip2: bundle
	@echo '[BUNDLE] Creating $(BUNDLE_NAME).tar.bz2'
	$(Q)mkdir -p "$(BUNDLES_DIR)/.bzip2/$(BUNDLE_NAME)"
	$(Q)cp -R    "$(BUNDLE_DIR)/"* "$(BUNDLES_DIR)/.bzip2/$(BUNDLE_NAME)/"
	$(Q)cd "$(BUNDLES_DIR)/.bzip2" && tar -jc$(shell if test -n "$(VERBOSE)"; then echo 'v'; fi)f "$(BUNDLES_DIR)/$(BUNDLE_NAME).tar.bz2" "$(BUNDLE_NAME)"
	$(Q)rm -rf   "$(BUNDLES_DIR)/.bzip2"

bundle_lha: bundle
	@echo '[BUNDLE] Creating $(BUNDLE_NAME).lha'
	$(Q)mkdir -p "$(BUNDLES_DIR)/.lha/$(BUNDLE_NAME)"
	$(Q)cp -R    "$(BUNDLE_DIR)/"* "$(BUNDLES_DIR)/.lha/$(BUNDLE_NAME)/"
	$(Q)cd "$(BUNDLES_DIR)/.lha" && lha ao6 "$(BUNDLES_DIR)/$(BUNDLE_NAME).lha" "$(BUNDLE_NAME)"
	$(Q)rm -rf   "$(BUNDLES_DIR)/.lha"

bundle_dmg: bundle
	@echo '[BUNDLE] Creating $(BUNDLE_NAME).dmg'
	$(Q)mkdir -p "$(BUNDLES_DIR)/OpenTTD $(REV)"
	$(Q)cp -R "$(BUNDLE_DIR)/" "$(BUNDLES_DIR)/OpenTTD $(REV)"
	$(Q)hdiutil create -ov -format UDZO -srcfolder "$(BUNDLES_DIR)/OpenTTD $(REV)" "$(BUNDLES_DIR)/$(BUNDLE_NAME).dmg"
	$(Q)rm -fr "$(BUNDLES_DIR)/OpenTTD $(REV)"

ifdef OSXAPP
install:
	@echo '[INSTALL] Cannot install the OSX Application Bundle'
else
install: bundle
	@echo '[INSTALL] Installing OpenTTD'
	$(Q)install -d "$(INSTALL_BINARY_DIR)"
	$(Q)install -d "$(INSTALL_ICON_DIR)"
	$(Q)install -d "$(INSTALL_DATA_DIR)/gm"
	$(Q)install -d "$(INSTALL_DATA_DIR)/data"
	$(Q)install -d "$(INSTALL_DATA_DIR)/lang"
	$(Q)install -d "$(INSTALL_DATA_DIR)/docs"
	$(Q)install -m 755 "$(BUNDLE_DIR)/$(TTD)" "$(INSTALL_BINARY_DIR)"
	$(Q)install -m 644 "$(BUNDLE_DIR)/lang/"* "$(INSTALL_DATA_DIR)/lang"
	$(Q)install -m 644 "$(BUNDLE_DIR)/data/"* "$(INSTALL_DATA_DIR)/data"
	$(Q)install -m 644 "$(BUNDLE_DIR)/docs/"* "$(INSTALL_DATA_DIR)/docs"
	$(Q)install -m 644 "$(BUNDLE_DIR)/media/"* "$(INSTALL_ICON_DIR)"
	$(Q)cp -R "$(BUNDLE_DIR)/scenario" "$(INSTALL_DATA_DIR)"
endif # OSXAPP
