| CurlFileObj (Ptr ()) | external pointer to pass to as WriteFunctions last argument.
|
| CurlURL URLString | the URL to use for next request; can be the full URL or just the authority/hostname.
|
| CurlPort Long | what port to use.
|
| CurlProxy String | name of proxy
|
| CurlUserPwd String | the user:pass string to use
|
| CurlProxyUserPwd String | same thing, but for the proxy.
|
| CurlRange String | byte range to fetch
|
| CurlInFile FilePath | external pointer to pass to as WriteFunctions last argument.
|
| CurlErrorBuffer (Ptr CChar) | buffer for curl to deposit error messages (must at least CURL_ERROR_SIZE bytes long). Uses standard error if not specified.
|
| CurlWriteFunction WriteFunction | callback to handle incoming data.
|
| CurlReadFunction ReadFunction | callback for supplying outgoing/uploaded data.
|
| CurlTimeout Long | number of seconds before timing out curl operation/request.
|
| CurlInFileSize Long | expected size of uploaded data.
|
| CurlPostFields [String] | (Multipart) POST data.
|
| CurlReferer String | Set the Referer: header to the given string.
|
| CurlFtpPort String | The string to feed to the FTP PORT command.
|
| CurlUserAgent String | Set the User-Agent: header to the given string.
|
| CurlLowSpeed Long | If the bytes per sec drops below the given value, the operation is aborted.
|
| CurlLowSpeedTime Long | Upper bound for request to complete.
|
| CurlResumeFrom Long | Byte offset at which the transfer (HTTP or FTP) should start from.
|
| CurlCookie String | Set the Cookie: header to the given cookie (name=value pairs, semicolon-separated) string.
|
| CurlHttpHeaders [String] | Embellish the outgoing request with the given list of (formatted) header values.
|
| CurlHttpPost [HttpPost] | (Multipart) POST data.
|
| CurlSSLCert FilePath | file holding your private SSL certificates (default format is PEM).
|
| CurlSSLPassword String | password to the above file.
|
| CurlSSLKeyPassword String | an alias for the previous.
|
| CurlCRLF Bool | If true, convert Unix newlines into CRLFs when transferring.
|
| CurlQuote [String] | Sequence of FTP commands to execute prior to the main request.
|
| CurlWriteHeader (Ptr ()) | State / pointer argument to pass to WriteFunction callback.
|
| CurlCookieFile FilePath | Path to file holding initial cookie data; also enables cookie handling.
|
| CurlSSLVersion Long | What protocol to attempt using (0:default;1:TLS;2:SSLv2;3:SSLv3)
|
| CurlTimeCondition TimeCond | How to interpret a conditional time value.
|
| CurlTimeValue Long | Number of secs since Jan 1, 1970. Interpretation is determined by CurlTimeCondition.
|
| CurlCustomRequest String | String holding alternative request command (WebDAV anyone?)
|
| CurlPostQuote [String] | List of commands to issue to FTP server after the main request.
|
| CurlWriteInfo String | Not sure what this one does; something about passing it to the output function.
|
| CurlVerbose Bool | Control verbosity
|
| CurlHeader Bool | Display outgoing and incoming headers
|
| CurlNoProgress Bool | Control progress meter
|
| CurlNoBody Bool | Use HEAD instead of GET
|
| CurlFailOnError Bool | If status response is >= 300, return an error (and no other output).
|
| CurlUpload Bool | Control the main dataflow, i.e., True to perform uploads.
|
| CurlPost Bool | Issue a POST request.
|
| CurlFtpListOnly Bool | Switch NLST for FTP directory listings
|
| CurlFtpAppend Bool | Control if FTP uploads append rather than overwrite files
|
| CurlUseNetRc NetRcOption | control how or if a user's.netrc will be consulted for user:password
|
| CurlFollowLocation Bool | Handle auto-redirects by chasing down Location: values in responses.
|
| CurlTransferTextASCII Bool | Turn on ASCII transfers for FTP transfers; default is binary (i.e. off).
|
| CurlPut Bool | Use PUT to upload data.
|
| CurlProgressFunction ProgressFunction | callback for showing progress
|
| CurlProgressData (Ptr ()) | state argumentto pass to progress callback.
|
| CurlAutoReferer Bool | Control if the Referer: field is set upon following Location: redirects
|
| CurlProxyPort Long | (Numeric) proxy port to use.
|
| CurlPostFieldSize Long | Size of the POSTed data.
|
| CurlHttpProxyTunnel Bool | tunnel all HTTP operations through the proxy.
|
| CurlInterface String | Interface name of outgoing network interface ( network interface, IP address, host name.)
|
| CurlKrb4Level String | Kerberos security level (clear, safe, confidential, private are good values, seemingly.)
|
| CurlSSLVerifyPeer Bool | Enable the authentication of peer certificate. Default is True.
|
| CurlCAInfo FilePath | If verifying peer's certificate, use certificates in this file to do so.
|
| CurlMaxRedirs Long | Maximum number of Location: redirects to chase down before giving up.
|
| CurlFiletime Bool | Try to determine the modification date of remote document; can be queried for.
|
| CurlTelnetOptions [String] | List of commands to use for initial telnet negotiations.
|
| CurlMaxConnects Long | Maximum number of cached active connections.
|
| CurlClosePolicy Long | No effect (obsolete.)
|
| CurlFreshConnect Bool | Force the opening up a new connection rather than try to reuse active connections. Default is not to.
|
| CurlForbidReuse Bool | Do not reuse the connection of next transfer when done.
|
| CurlRandomFile FilePath | Path to file used to seed (Open)SSL PRNG.
|
| CurlEgdSocket FilePath | Path to domain socket of EG Daemon.
|
| CurlConnectTimeout Long | max number of seconds to wait for the initial connection to happen.
|
| CurlHeaderFunction WriteFunction | callback used to handle _incoming_ header data.
|
| CurlHttpGet Bool | Revert to a GET for the next request.
|
| CurlSSLVerifyHost Long | Perform Common name checking in peer certificate (1=> existence;2=> matches hostname.)
|
| CurlCookieJar FilePath | Path to file where additional cookie information will be stored.
|
| CurlSSLCipherList String | Colon-separated string list of cipher preferences to use for upcoming connection (e.g., 3DES:+RSA)
|
| CurlHttpVersion HttpVersion | What HTTP version to use, should you want to drop back for some reason.
|
| CurlFtpUseEPSV Bool | Attempt the use of EPSV before PASV for passive FTP downloads.
|
| CurlSSLCertType String | The format of your certificates (PEM, DER)
|
| CurlSSLKey FilePath | Filename of private key.
|
| CurlSSLKeyType String | Format of private key; use ENG to load from a crypto engine.
|
| CurlSSLEngine String | Name of crypto engine to use.
|
| CurlSSLEngineDefault | Make crypto engine the default for crypto operations.
|
| CurlDNSUseGlobalCache Bool | Have library uses its MT-unfriendly DNS global cache.
|
| CurlDNSCacheTimeout Long | Number of seconds to cache results of DNS lookups in memory.
|
| CurlPreQuote [String] | FTP commands to issue after connection and transfer mode has been set.
|
| CurlDebugFunction DebugFunction | callback to catch and report transfer operations.
|
| CurlDebugData (Ptr ()) | state argument to pass to debug callback.
|
| CurlCookieSession Bool | Signal the start of a cookie session, ignoring previous session cookies.
|
| CurlCAPath FilePath | Directory holding CA certificates; used when verifying peer certificate.
|
| CurlBufferSize Long | Turn (down, presumably) the buffers the received data is chunked up into (and reported to the WriteFunction.) A hint, library is free to ignore.
|
| CurlNoSignal Bool | Turn off use of signals internally.
|
| CurlShare (Ptr ()) | Share handles are used for sharing data among concurrent Curl objects.
|
| CurlProxyType Long | What type of proxy to use.
|
| CurlEncoding String | What to report in the Accept-Encoding: header
|
| CurlPrivate (Ptr ()) | Data associated with a Curl handle.
|
| CurlHttp200Aliases String | Alternatives to standard 200 OK response strings; whatever it takes, I suppose.
|
| CurlUnrestrictedAuth Bool | Pass on user:pass when following redirects.
|
| CurlFtppUseEPRT Bool | For active FTP downloads, try using EPRT command over LPRT.
|
| CurlHttpAuth [HttpAuth] | State your authentication preferences.
|
| CurlSSLCtxFunction SSLCtxtFunction | callback to handle setting up SSL connections; have the power to abort them.
|
| CurlSSLCtxData (Ptr ()) | state argument to pass into the above callback.
|
| CurlFtpCreateMissingDirs Bool | Have remote directories be created if not already there
|
| CurlProxyAuth [HttpAuth] | What preferred authentication schemes to use wrt. proxy.
|
| CurlFtpResponseTimeout Long | max number of seconds to wait for remote server to ACK commands.
|
| CurlIPResolve Long | Whether to resolve wrt IPv4 or IPv6.
|
| CurlMaxFileSize Long | Limit the number of bytes you're willing to download.
|
| CurlInFileSizeLarge LLong | Wider alternative of option giving upper bound of uploaded content (-1 => unknown.)
|
| CurlResumeFromLarge LLong | Wider alternative for specifying initial transfer offset.
|
| CurlMaxFileSizeLarge LLong | Wider alternative for specifying max download size.
|
| CurlNetrcFile FilePath | Path to user's .netrc
|
| CurlFtpSSL Long | Try enabling the use of SSL for FTP control connections and/or transfers.
|
| CurlPostFieldSizeLarge LLong | Size of data to POST; if unspecified (or -1), curl uses strlen().
|
| CurlTCPNoDelay Bool | Turn on or off the TCP/IP NODELAY option.
|
| CurlFtpSSLAuth Long | Twiddle if TLS or SSL is used.
|
| CurlIOCTLFunction (Ptr ()) | somewhat obscure callback for handling read stream resets.
|
| CurlIOCTLData (Ptr ()) | state argument to the above.
|
| CurlFtpAccount String | The string to use when server asks for account info.
|
| CurlCookieList String | Cookie string to pass cookie engine; ALL scrubs all cookie info; SESS scrubs session ones.
|
| CurlIgnoreContentLength Bool | If Content-Length: values are troublesome (wrong, perhaps?), use this option to ignore using them as guidance.
|
| CurlFtpSkipPASVIP Bool | Ignore IP address in 227 responses.
|
| CurlFtpFileMethod Long | How to navigate to a file on the remote server (single, multiple CWDs).
|
| CurlLocalPort Port | What local port to use for established connection.
|
| CurlLocalPortRange Port | Number of attempts at finding local ports (using LocalPort as initial base.)
|
| CurlConnectOnly Bool | If enabled, perform all steps up until actual transfer.
next three for completeness.
|
| CurlConvFromNetworkFunction (Ptr ()) | callback for doing character translations from network format.
|
| CurlConvToNetworkFunction (Ptr ()) | callback for doing character translations to network format.
|
| CurlConvFromUtf8Function (Ptr ()) | callback for translating UTF8 into host encoding.
|
| CurlMaxSendSpeedLarge LLong | Specifies throttle value for outgoing data.
|
| CurlMaxRecvSpeedLarge LLong | Specifies throttle for incoming data.
|
| CurlFtpAlternativeToUser String | Alternative (to user:pass) for FTP authentication; weird.
|
| CurlSockOptFunction (Ptr ()) | callback that's injected between socket creation and connection.
|
| CurlSockOptData (Ptr ()) | state argument to the above.
|
| CurlSSLSessionIdCache Bool | Enable the SSL session id cache; default is on, so use this to disable.
|
| CurlSSHAuthTypes [SSHAuthType] | SSH authentication methods to use.
|
| CurlSSHPublicKeyFile FilePath | Path to file holding user's SSH public key.
|
| CurlSSHPrivateKeyFile FilePath | Path to file holding user's SSH private key.
|
| CurlFtpSSLCCC Bool | Send CCC command after FTP connection has been authenticated.
|
| CurlTimeoutMS Long | Max number of milliseconds that a transfer may take.
|
| CurlConnectTimeoutMS Long | Max number of milliseconds that a connection attempt may take to complete.
|
| CurlHttpTransferDecoding Bool | Disable transfer decoding; if disabled, curl will turn off chunking.
|
| CurlHttpContentDecoding Bool | Disable content decoding, getting the raw bits.
sync'ed wrt 7.19.2
|
| CurlNewFilePerms Long | |
| CurlNewDirectoryPerms Long | |
| CurlPostRedirect Bool | |
| CurlSSHHostPublicKeyMD5 String | |
| CurlCopyPostFields Bool | |
| CurlProxyTransferMode Long | |
| CurlCRLFile FilePath | |
| CurlIssuerCert FilePath | |
| CurlAddressScope Long | |
| CurlCertInfo Long | |
| CurlUserName String | |
| CurlUserPassword String | |
| CurlProxyUser String | |
| CurlProxyPassword String | |
Instances